#include <string>
#include <vector>
#include <stdexcept>
#include <iostream>
#include <pthread.h>
#include <sstream>

Classes
class	RtAudioError
	Exception handling class for RtAudio. More...

class	RtAudio
	Realtime audio i/o C++ classes. More...

struct	RtAudio::DeviceInfo
	The public device information structure for returning queried values. More...

struct	RtAudio::StreamParameters
	The structure for specifying input or output stream parameters. More...

struct	RtAudio::StreamOptions
	The structure for specifying stream options. More...

Typedefs
typedef unsigned long	RtAudioFormat
	RtAudio data format type. More...

typedef unsigned int	RtAudioStreamFlags
	RtAudio stream option flags. More...

typedef unsigned int	RtAudioStreamStatus
	RtAudio stream status (over- or underflow) flags. More...

typedef int(*	RtAudioCallback) (void outputBuffer, void inputBuffer, unsigned int nFrames, double streamTime, RtAudioStreamStatus status, void *userData)
	RtAudio callback function prototype. More...

typedef void(*	RtAudioErrorCallback) (RtAudioError::Type type, const std::string &errorText)
	RtAudio error callback function prototype. More...

Class Documentation

struct RtAudio::DeviceInfo

The public device information structure for returning queried values.

Class Members
bool	probed	true if the device capabilities were successfully probed.
string	name	Character string device identifier.
unsigned int	outputChannels	Maximum output channels supported by device.
unsigned int	inputChannels	Maximum input channels supported by device.
unsigned int	duplexChannels	Maximum simultaneous input/output channels supported by device.
bool	isDefaultOutput	true if this is the default output device.
bool	isDefaultInput	true if this is the default input device.
vector< unsigned int >	sampleRates	Supported sample rates (queried from list of standard rates).
unsigned int	preferredSampleRate	Preferred sample rate, e.g. for WASAPI the system sample rate.
RtAudioFormat	nativeFormats	Bit mask of supported data formats.

struct RtAudio::StreamParameters

The structure for specifying input or output stream parameters.

Class Members
unsigned int	deviceId	Device index (0 to getDeviceCount() - 1).
unsigned int	nChannels	Number of channels.
unsigned int	firstChannel	First channel index on device (default = 0).

struct RtAudio::StreamOptions

The structure for specifying stream options.

The following flags can be OR'ed together to allow a client to make changes to the default stream behavior:

RTAUDIO_NONINTERLEAVED: Use non-interleaved buffers (default = interleaved).
RTAUDIO_MINIMIZE_LATENCY: Attempt to set stream parameters for lowest possible latency.
RTAUDIO_HOG_DEVICE: Attempt grab device for exclusive use.
RTAUDIO_SCHEDULE_REALTIME: Attempt to select realtime scheduling for callback thread.
RTAUDIO_ALSA_USE_DEFAULT: Use the "default" PCM device (ALSA only).

By default, RtAudio streams pass and receive audio data from the client in an interleaved format. By passing the RTAUDIO_NONINTERLEAVED flag to the openStream() function, audio data will instead be presented in non-interleaved buffers. In this case, each buffer argument in the RtAudioCallback function will point to a single array of data, with nFrames samples for each channel concatenated back-to-back. For example, the first sample of data for the second channel would be located at index nFrames (assuming the buffer pointer was recast to the correct data type for the stream).

Certain audio APIs offer a number of parameters that influence the I/O latency of a stream. By default, RtAudio will attempt to set these parameters internally for robust (glitch-free) performance (though some APIs, like Windows DirectSound, make this difficult). By passing the RTAUDIO_MINIMIZE_LATENCY flag to the openStream() function, internal stream settings will be influenced in an attempt to minimize stream latency, though possibly at the expense of stream performance.

If the RTAUDIO_HOG_DEVICE flag is set, RtAudio will attempt to open the input and/or output stream device(s) for exclusive use. Note that this is not possible with all supported audio APIs.

If the RTAUDIO_SCHEDULE_REALTIME flag is set, RtAudio will attempt to select realtime scheduling (round-robin) for the callback thread. The priority parameter will only be used if the RTAUDIO_SCHEDULE_REALTIME flag is set. It defines the thread's realtime priority.

If the RTAUDIO_ALSA_USE_DEFAULT flag is set, RtAudio will attempt to open the "default" PCM device when using the ALSA API. Note that this will override any specified input or output device id.

The numberOfBuffers parameter can be used to control stream latency in the Windows DirectSound, Linux OSS, and Linux Alsa APIs only. A value of two is usually the smallest allowed. Larger numbers can potentially result in more robust stream performance, though likely at the cost of stream latency. The value set by the user is replaced during execution of the RtAudio::openStream() function by the value actually used by the system.

The streamName parameter can be used to set the client name when using the Jack API. By default, the client name is set to RtApiJack. However, if you wish to create multiple instances of RtAudio with Jack, each instance must have a unique client name.

Class Members
RtAudioStreamFlags	flags	A bit-mask of stream flags (RTAUDIO_NONINTERLEAVED, RTAUDIO_MINIMIZE_LATENCY, RTAUDIO_HOG_DEVICE, RTAUDIO_ALSA_USE_DEFAULT).
unsigned int	numberOfBuffers	Number of stream buffers.
string	streamName	A stream name (currently used only in Jack).
int	priority	Scheduling priority of callback thread (only used with flag RTAUDIO_SCHEDULE_REALTIME).

Typedef Documentation

typedef unsigned long RtAudioFormat

RtAudio data format type.

Support for signed integers and floats. Audio data fed to/from an RtAudio stream is assumed to ALWAYS be in host byte order. The internal routines will automatically take care of any necessary byte-swapping between the host format and the soundcard. Thus, endian-ness is not a concern in the following format definitions.

RTAUDIO_SINT8: 8-bit signed integer.
RTAUDIO_SINT16: 16-bit signed integer.
RTAUDIO_SINT24: 24-bit signed integer.
RTAUDIO_SINT32: 32-bit signed integer.
RTAUDIO_FLOAT32: Normalized between plus/minus 1.0.
RTAUDIO_FLOAT64: Normalized between plus/minus 1.0.

typedef unsigned long RtAudioStreamFlags

RtAudio stream option flags.

The following flags can be OR'ed together to allow a client to make changes to the default stream behavior:

RTAUDIO_NONINTERLEAVED: Use non-interleaved buffers (default = interleaved).
RTAUDIO_MINIMIZE_LATENCY: Attempt to set stream parameters for lowest possible latency.
RTAUDIO_HOG_DEVICE: Attempt grab device for exclusive use.
RTAUDIO_ALSA_USE_DEFAULT: Use the "default" PCM device (ALSA only).
RTAUDIO_JACK_DONT_CONNECT: Do not automatically connect ports (JACK only).

By default, RtAudio streams pass and receive audio data from the client in an interleaved format. By passing the RTAUDIO_NONINTERLEAVED flag to the openStream() function, audio data will instead be presented in non-interleaved buffers. In this case, each buffer argument in the RtAudioCallback function will point to a single array of data, with nFrames samples for each channel concatenated back-to-back. For example, the first sample of data for the second channel would be located at index nFrames (assuming the buffer pointer was recast to the correct data type for the stream).

Certain audio APIs offer a number of parameters that influence the I/O latency of a stream. By default, RtAudio will attempt to set these parameters internally for robust (glitch-free) performance (though some APIs, like Windows DirectSound, make this difficult). By passing the RTAUDIO_MINIMIZE_LATENCY flag to the openStream() function, internal stream settings will be influenced in an attempt to minimize stream latency, though possibly at the expense of stream performance.

If the RTAUDIO_HOG_DEVICE flag is set, RtAudio will attempt to open the input and/or output stream device(s) for exclusive use. Note that this is not possible with all supported audio APIs.

If the RTAUDIO_SCHEDULE_REALTIME flag is set, RtAudio will attempt to select realtime scheduling (round-robin) for the callback thread.

If the RTAUDIO_ALSA_USE_DEFAULT flag is set, RtAudio will attempt to open the "default" PCM device when using the ALSA API. Note that this will override any specified input or output device id.

If the RTAUDIO_JACK_DONT_CONNECT flag is set, RtAudio will not attempt to automatically connect the ports of the client to the audio device.

typedef unsigned long RtAudioStreamStatus

RtAudio stream status (over- or underflow) flags.

Notification of a stream over- or underflow is indicated by a non-zero stream status argument in the RtAudioCallback function. The stream status can be one of the following two options, depending on whether the stream is open for output and/or input:

RTAUDIO_INPUT_OVERFLOW: Input data was discarded because of an overflow condition at the driver.
RTAUDIO_OUTPUT_UNDERFLOW: The output buffer ran low, likely producing a break in the output sound.

typedef int(* RtAudioCallback) (void *outputBuffer, void *inputBuffer, unsigned int nFrames, double streamTime, RtAudioStreamStatus status, void *userData)

RtAudio callback function prototype.

All RtAudio clients must create a function of type RtAudioCallback to read and/or write data from/to the audio stream. When the underlying audio system is ready for new input or output data, this function will be invoked.

Parameters

outputBuffer	For output (or duplex) streams, the client should write `nFrames` of audio sample frames into this buffer. This argument should be recast to the datatype specified when the stream was opened. For input-only streams, this argument will be NULL.
inputBuffer	For input (or duplex) streams, this buffer will hold `nFrames` of input audio sample frames. This argument should be recast to the datatype specified when the stream was opened. For output-only streams, this argument will be NULL.
nFrames	The number of sample frames of input or output data in the buffers. The actual buffer size in bytes is dependent on the data type and number of channels in use.
streamTime	The number of seconds that have elapsed since the stream was started.
status	If non-zero, this argument indicates a data overflow or underflow condition for the stream. The particular condition can be determined by comparison with the RtAudioStreamStatus flags.
userData	A pointer to optional data provided by the client when opening the stream (default = NULL).

Returns: To continue normal stream operation, the RtAudioCallback function should return a value of zero. To stop the stream and drain the output buffer, the function should return a value of one. To abort the stream immediately, the client should return a value of two.

typedef void(* RtAudioErrorCallback) (RtAudioError::Type type, const std::string &errorText)

RtAudio error callback function prototype.

Parameters

type	Type of error.
errorText	Error description.

Classes

Typedefs

Class Documentation

Typedef Documentation